Cisco Cisco ASR 5700
SGSN PSP Configuration Mode Commands
▀ sctp-rto-max
▄ Command Line Interface Reference, StarOS Release 17
8504
sctp-rto-max
This command sets the maximum retransmission timeout value for the SCTP.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SS7 Routing Domain Configuration > Peer-Server Configuration > PSP Configuration
configure > ss7-routing-domain routing_domain_id variant variant_type > peer-server id id
> psp instance psp_instance
> psp instance psp_instance
Entering the above command sequence results in the following prompt:
[local]host_name(config-ss7-rd-ss7rd_id-ps-peer-server_id-psp-psp_instance)#
Syntax
sctp-rto-max value
default sctp-rto-max
default
Resets the system to the
sctp-rto-max
default of 600 (60 seconds).
value
Set the maximum retransmission timeout value in increments of 100 milliseconds (0.1 seconds) and the value
must be an integer between 5 and 1200.
must be an integer between 5 and 1200.
Usage
Important:
Before using this command to set a value, you must disassociate the PSP instance with the
no
associate
command. When you have set the value with this command, then use the
associate
command to setup a
new association.
Use this command to configure the maximum time for retransmissions.
The value set for
The value set for
sctp-rto-max
should be greater than or equal to the value set for
sctp-rto-initial
(
sctp-rto-max
=>
sctp-rto-initial
).
Example
The following sets the timeout for 45 seconds:
sctp-rto-max 450