Cisco Cisco Packet Data Gateway (PDG)
APN Profile Configuration Mode
apn-type ▀
Command Line Interface Reference, StarOS Release 17 ▄
1483
apn-type
Identifies the type of APN as an IMS APN.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(apn-profile-profile_name)#
Syntax
apn-type { ims }
remove apn-type ims
remove
Erases this identification configuration from the APN profile and resets the APN profile to the default
behavior which disables the APN type as IMS.
behavior which disables the APN type as IMS.
Usage
This command identifies the APN as an IMS APN. This enables the SGSN to delay sending Modify Bearer
Request to the S-GW until after receiving the Forward Relocation Complete Ack from the peer during SRNS
procedure.
Also, The following CLI identifies an APN as IMS APN and to configure to indicate whether the PGW
supports optional extension or if the MME initiates PDN deactivation for HSS initiated P-CSCF restoration.
To enable HSS-based P-CSCF Restoration, use the pcscf-restoration command under the Call Control Profile
mode.
Request to the S-GW until after receiving the Forward Relocation Complete Ack from the peer during SRNS
procedure.
Also, The following CLI identifies an APN as IMS APN and to configure to indicate whether the PGW
supports optional extension or if the MME initiates PDN deactivation for HSS initiated P-CSCF restoration.
To enable HSS-based P-CSCF Restoration, use the pcscf-restoration command under the Call Control Profile
mode.
Example
Identify the APN for this profile as an IMS type APN:
apn-type ims
The following command selects pco-update as the P-CSCF Restoration method:
apn-type ims pcscf-restoration pco-update
The following command selects pdn-deactivate as the P-CSCF Restoration method:
apn-type ims pcscf-restoration pdn-deactivate