Cisco Cisco Packet Data Gateway (PDG)
Call Control Profile Configuration Mode
▀ map
▄ Command Line Interface Reference, StarOS Release 17
2014
map
Configures the optional extensions to Mobile Application Part (MAP) messages.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
[ remove ] map message { mo-fwd-sm imsi | update-gprs-location { imeisv | private-
extension access-type } }
extension access-type } }
remove
IMEI-SV is not included in the GLU request -- this is the default behavior.
message mo-fwd-sm imsi
Configures the SGSN to include the IMSI of the originating subscriber in the mobile-originated SM transfer.
This parameter shall be included when the sending entity (MSC or SGSN) supports mobile number
portability (MNP). This IMSI IE is required in the in MAP-MO-FORWARD-SHORT-MESSAGE in
countries where MNP is deployed.This keyword-set is required. The default is disabled.
This parameter shall be included when the sending entity (MSC or SGSN) supports mobile number
portability (MNP). This IMSI IE is required in the in MAP-MO-FORWARD-SHORT-MESSAGE in
countries where MNP is deployed.This keyword-set is required. The default is disabled.
update-gprs-location
Includes a GLU message.
imeisv
Specifies the International Mobile equipment Identity-Software Version (IMEI-SV) information to include in
the GPRS Location Update (GLU) request message. SGSN will include IMEI-SV in the message, if
available. Default: disabled
the GPRS Location Update (GLU) request message. SGSN will include IMEI-SV in the message, if
available. Default: disabled
private-extension access-type
Includes a specific access-type private extension in the message.
Usage
This command configures optional extensions to MAP messages. The HLR should ignore these extensions if
not supported by the HLR.
not supported by the HLR.
Example
Use the following command to have the SGSN add GLU extension information to the MAP messages sent to
the HLR.
the HLR.