Cisco Cisco Packet Data Gateway (PDG)
Call Control Profile Configuration Mode
sctp-down ▀
Command Line Interface Reference, StarOS Release 17 ▄
2071
sctp-down
Configures the behavior towards UE (user equipment) when Stream Control Transmission Protocol (SCTP) goes down.
Product
MME
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
sctp-down { detach-ue | idle-mode-entry }
default sctp-down
default
Reset the profile configuration to the system default when SCTP layer goes down. The default for this
command is
command is
idle-mode-entry
.
detach-ue
When SCTP goes down, the MME will detach the UE.
idle-mode-entry
When the SCTP goes down, the MME will move the UE to idle-mode. This is the default for this command.
Usage
Use this command to set the MME’s reactions when the SCTP goes down.
Example
Configure the MME to put the UE into idle-mode when the SCTP layer goes down:
sctp-down idle-mode-entry