Cisco Cisco Packet Data Gateway (PDG)
CSCF NPDB Client Configuration Mode Commands
▀ bind
▄ Command Line Interface Reference, StarOS Release 17
3130
bind
Binds the NPDB client to an IP address.
Product
SCM (S-CSCF)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Service Configuration > Serving-CSCF Configuration >
NPDB Client Configuration
NPDB Client Configuration
configure > context context_name > cscf service service_name > serving-cscf > npdb-client
client_name
client_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-npdb-client)#
Syntax
bind address IPv4_address system-id system_id id client_id [ encrypted ] password
password
password
no bind
address
IPv4_address
Specifies the NPDB client IP address to establish the TCP connection with NPDB server.
IPv4_address
must be expressed in dotted decimal notation for IPv4.
system-id
system_id
Specifies the identifier of the system performing query to NPDB server.
system_id
must be an unsigned integer from 0 to 4294962295.
id
client_id
Specifies the ID of the NPDB client.
client_id
must be from 1 to 15 alpha and/or numeric characters.
[ encrypted ] password
password
Specifies the password of the NPDB client and whether it is encrypted.
password
password
must be from 1 to 15 alpha and/or numeric characters.
encrypted password
password
must be from 1 to 132 alpha and/or numeric characters.
Important:
Normally, encrypted passwords are only used inside configuration files
no bind
Removes the binding of the NPDB client.