Cisco Cisco Packet Data Gateway (PDG)
CSCF Serving-CSCF Configuration Mode Commands
▀ npdb-client
▄ Command Line Interface Reference, StarOS Release 17
3344
npdb-client
Creates an NPDB (Number Portability Data Base) client under CSCF and enters the CSCF NPDB Client Configuration
Mode.
Mode.
Product
SCM (S-CSCF)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Service Configuration > Serving-CSCF Configuration
configure > context context_name > cscf service service_name > serving-cscf
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cscf-service-serving-cscf)#
Syntax
npdb-client client_name [ -noconfirm ]
no npdb-client
no
Deletes NPDB client under CSCF.
client_name
Specifies the name of the NPDB client.
client_name
must be from 1 to 79 alpha and/or numeric characters.
-noconfirm
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage
Use this command to enable the NPDB client feature and enter the NPDB Client Configuration Mode.
Entering this command results in the following prompt:
Entering this command results in the following prompt:
[context_name]hostname(config-npdb-client)#
NPDB Client Configuration Mode commands are defined in the CSCF NPDB Client Configuration Mode
Commands chapter in this guide.
Commands chapter in this guide.
Example
The following command creates an NPDB client named
npdb1
and enters NPDB Client Configuration
Mode:
npdb-client npdb1