Cisco Cisco Packet Data Gateway (PDG)

 

Configure the GPRS Tunneling Protocol Control (GTP-C) plane settings for this service. 

 

ePDG 

MME 

P-GW 

SAEGW 

S-GW 

SGSN 

 

Administrator 

 

Exec > Global Configuration > Context Configuration > eGTP Service Configuration 

configure > context context_name > egtp-service service_name

 

Entering the above command sequence results in the following prompt: 

[context_name]host_name(config-egtp-service)# 

 

gtpc { allow-on-congestion { apn-name apn_name | arp priority_level } | bind { ipv4-
address ipv4_address [ ipv6-address ipv6_address ] | ipv6-address ipv6_address [ ipv4-
address ipv4_address ] } | echo-interval seconds [ dynamic [ smooth-factor multiplier ] ] 
echo-max-retransmissoins number | echo-retransmission-timeout seconds | error-response-
handling | ip qos-dscp { forwarding_type } | max-retransmissions num | node-feature { 
network-triggered-service-restoration | pgw-restart-notification } | path-failure 
detection-policy echo | private-extension overcharge-protection | retransmission-timeout 
seconds | retransmission-timeout-ms milliseconds } 

no gtpc { allow-on-congestion { apn-name apn_name | arp priority_level } | bind { ipv4-
address ipv4_address [ ipv6-address ipv6_address ] | ipv6-address ipv6_address [ ipv4-
address ipv4_address ] } | echo-interval | error-response-handling | node-feature { 
network-triggered-service-restoration | pgw-restart-notification } | path-failure 
detection-policy | private-extension overcharge-protection  } 

default gtpc { echo-interval | echo-max-retransmissons | echo-retransmission-timeout | ip 
qos-dscp | max-retransmissions | node-feature { network-triggered-service-restoration | 
pgw-restart-notification } | path-failure detection-policy | retransmission-timeout | 
retransmission-timeout-ms } 

 

Disables or removes the configured GTP-C setting.