Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Commands (A-C)
clear gtpu statistics ▀
Command Line Interface Reference, StarOS Release 17 ▄
3869
clear gtpu statistics
Clears enhanced GPRS Tunneling Protocol user plane statistics and counters found in show command outputs and bulk
statistics associated with all GTP-U-related services or those defined by the parameters in this command.
statistics associated with all GTP-U-related services or those defined by the parameters in this command.
Product
P-GW
S-GW
MME
SAEGW
Privilege
Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
clear gtpu statistics [ gtpu-service gtpu_service_name | mseg-service mseg_service_name |
peer-address ipv4/ipv6_address ]
peer-address ipv4/ipv6_address ]
gtpu-service gtpu_service_name
Clears GTP-U statistics for an existing GTP-U service specified as an alphanumeric string of 1 through 63
characters.
characters.
mseg-service mseg_service_name
Important:
This keyword is not supported in this release.
peer-address ipv4/ipv6_address
Clears GTP-U statistics for an existing peer IP address entered in IPv4 dotted-decimal or IPv6 colon-
separated-hexadecimal notation.
separated-hexadecimal notation.
Usage
Use this command to clear running statistics and counters found in show command and bulk statistics outputs
for all GTP-U-related services or for specific services or IP addresses as specified by parameters in this
command.
for all GTP-U-related services or for specific services or IP addresses as specified by parameters in this
command.
Example
The following command clears GTP-U statistics and counter associated with a GTP-U service name
gtpu-
12
configured on this system:
clear gtpu statistics gtpu-service gtpu-12