Cisco Cisco Packet Data Gateway (PDG)
Exec Mode show Commands (M-P)
show mme-service ▀
Command Line Interface Reference, StarOS Release 17 ▄
4729
show mme-service
Displays configuration information for Mobility Management Entity (MME) services on this system.
Product
MME
Privilege
Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show mme-service { all | name svc_name [ offload statistics ] } [ | { grep grep_options |
more } ]
more } ]
all
Displays configuration information for all MME services configured on this system.
name service_name
Displays configuration information for an existing MME service specified as an alphanumeric string of 1
through 63 characters.
through 63 characters.
offload statistics
Displays configuration information for the MME load rebalancing feature (UE offload), as well as current
statistics about any active offloading processes.
This keyword option is only available in Release 14.0 and higher.
statistics about any active offloading processes.
This keyword option is only available in Release 14.0 and higher.
| { grep grep_options | more }
Pipes (sends) the output of the command to the command specified. You must specify a command to which
the output will be sent.
For details on the usage of the
the output will be sent.
For details on the usage of the
grep
and
more
commands, refer to the Regulating a Command’s Output
section in the Command Line Interface Overview chapter.
Usage
Use this command to view configuration information for MME services on this system.
Example
The following command displays service statistics for the MME service named
mme1
:
show mme-service name mme1
Important:
Output descriptions for these commands are available in the Statistics and Counters Reference.