Cisco Cisco Packet Data Gateway (PDG)
Exec Mode show Commands (M-P)
▀ show mpls ldp
▄ Command Line Interface Reference, StarOS Release 17
4746
show mpls ldp
Displays MPLS Label Distribution Protocol (LDP) information.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show mpls ldp { bindings { ldp-id IPv4_add | local [ ldp-id | local | prefix | remote ] |
prefix IPv4_addr | remote } | discovery | neighbor { detail | ldp-id } }
prefix IPv4_addr | remote } | discovery | neighbor { detail | ldp-id } }
bindings
Displays the MPLS LDP label bindings.
ldp-id
Displays label values for a specific peer LDP ID.
local
Displays locally assigned label values.
prefix
Displays label values for a specific prefix.
remote
Displays remotely assigned label values.
discovery
Displays the MPLS LDP discovery information.
neighbor
Displays the MPLS LDP peer information.
detail
Displays the MPLS LDP peer information in details. The displayed information includes, Local LDP ID, Peer
LDP ID, Transport address, State (for example, Established), Role (for example, Active), Uptime, Keepalive
negotiated hold time, Proposed Local/Peer, Remaining Keepalive hold time, and Address advertised.
LDP ID, Transport address, State (for example, Established), Role (for example, Active), Uptime, Keepalive
negotiated hold time, Proposed Local/Peer, Remaining Keepalive hold time, and Address advertised.