Cisco Cisco Packet Data Gateway (PDG)
GPRS Service Configuration Mode Commands
plmn ▀
Command Line Interface Reference, StarOS Release 17 ▄
5993
plmn
This command identifies the Public Land Mobile Network (PLMN) for the GPRS service.It also configures the common
PLMN-Id and an optional list of dedicated PLMN-Ids in support of Multi-Operator Core Network (MOCN) operation.
PLMN-Id and an optional list of dedicated PLMN-Ids in support of Multi-Operator Core Network (MOCN) operation.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GPRS Service Configuration
configure > context context_name > gprs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gprs-service)#
Syntax
plmn id mcc mcc_num mnc mnc_num [ network-sharing common-plmn mcc mcc_num mnc mnc_num [
plmn-list mcc mcc_num mnc mnc_num [ mcc mcc_num mnc mnc_num ] + ] ]
plmn-list mcc mcc_num mnc mnc_num [ mcc mcc_num mnc mnc_num ] + ] ]
no plmn id
no
Removes the PLMN information from the configuration for the current SGSN service.
mcc
mcc_num
Define the mobile country code (MCC) portion of the PLMN Id.
mnc_num
must be a 3 digit integer from 100 to 999. MCC values of 000-099 are Reserved codes.
mnc
mnc_num
Define the mobile network code (MNC) portion of the PLMN Id.
mnc_num
must be a 2 or 3 digit integer from 00 to 999. MNC value of 000 is reserved.
network-sharing common-plmn
Configures the common PLMN-Id broadcast by a radio network. An MS that does not support network
sharing will only see this PLMN-Id. An MS that supports network sharing (MOCN) will see this PLMN-Id
and the list of PLMN-Ids configured using the
sharing will only see this PLMN-Id. An MS that supports network sharing (MOCN) will see this PLMN-Id
and the list of PLMN-Ids configured using the
plmn-id
keyword.
plmn-list
Configures a list of PLMN-Ids that an MS will see when network sharing is enabled.
+
The plus symbol indicates that indicates that more than one more than one set of the keywords, for PLMN-Id,
can be entered within a single command.
can be entered within a single command.