Cisco Cisco Packet Data Gateway (PDG)
HNB-CS Network Configuration Mode Commands
▀ map lac
▄ Command Line Interface Reference, StarOS Release 17
6322
Important:
This command can be used together with Iu-Flex configuration, but MSC selection based on LAC
takes place only if Iu-Flex is not configured. If both Iu-Flex and LAC are configured then selection of MSC is based on
Iu-Flex configuration only.
Iu-Flex configuration only.
Example
The following command maps the LAC range from
20
to
50
with MSC point code
1.2.3
:
map lac range 20 to 50 point-code 1.2.3
The following command removes all LAC range matching entries between
20
to
50
from the configuration:
no map lac range 20 to 50