Cisco Cisco Packet Data Gateway (PDG)
MAG Service Configuration Mode Commands
signalling-packets ▀
Command Line Interface Reference, StarOS Release 17 ▄
7127
signalling-packets
Enables the QoS Differentiated Services Code Point (DSCP) marking feature for IP headers carrying outgoing
signalling packets.
signalling packets.
Product
HSGW
S-GW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MAG Service Configuration
configure > context context_name > mag-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mag-service)#
Syntax
signalling-packets ip-header-dscp value
[ default | no ] signalling-packets ip-header-dscp
default
Restores the specified parameter to its default setting of 0x0.
no
Disables the specified functionality.
ip-header-dscp value
Used to configure the QoS Differentiated Services Code Point (DSCP) marking for IP header encapsulation.
value
: Represents the DSCP setting as the first six most-significant bits of the ToS field. It can be
configured to any hexadecimal value from 0x0 through 0x3F. Default is 0x0.
Usage
Use this command to enable or disable the DSCP marking feature for IP headers carrying outgoing signalling
packets. DSCP marking is disabled by default.
packets. DSCP marking is disabled by default.
Example
The following command configures the HSGW service to support DSCP marking for IP headers carrying
outgoing signalling packets:
outgoing signalling packets:
signalling-packets ip-header-dscp 0x21