Cisco Cisco Packet Data Gateway (PDG)
MME Service Configuration Mode Commands
associate ▀
Command Line Interface Reference, StarOS Release 17 ▄
7185
foreign-plmn-guti-mgmt-db
db_name
Associates a Foreign PLMN GUTI management database with this MME service.
db_name
specifies the name for a pre-configured foreign PLMN GUTI management database to associate
with the MME service. For more information on the Foreign PLMN GUTI management database, refer to the
foreign-plmn-guti-mgmt-db
command in the LTE Policy Configuration Mode Commands chapter.
Only one Foreign PLMN GUTI management database can be associated to an MME service. The Foreign
PLMN GUTI management database should be configured prior to issuing this command.
Multiple MME services can be associated to the same Foreign PLMN GUTI management database.
PLMN GUTI management database should be configured prior to issuing this command.
Multiple MME services can be associated to the same Foreign PLMN GUTI management database.
henbgw-mgmt-db db_name
Associates the specified HeNB-GW management database with the MME service.
db_name
specifies the name for an LTE MME HeNB-GW Management Database to associate with the MME
service as an alphanumeric string of 1 through 64 characters. This is required to support S1 HANDOVERs to
Home eNodeBs connected via a HeNB-GW.
Home eNodeBs connected via a HeNB-GW.
hss-peer-service
hss_svc_name
Associates an HSS peer service with this MME service.
hss_svc_name
specifies the name for a pre-configured HSS peer service to associate with the MME service
as an alphanumeric string of 1 through 64 characters. The HSS peer service provides S6a and S13 interface
support via the Diameter protocol between the MME and an HSS (S6a) or EIR (S13). For more information
about the HSS peer service, refer to the
support via the Diameter protocol between the MME and an HSS (S6a) or EIR (S13). For more information
about the HSS peer service, refer to the
hss-peer-service
command in the Context Configuration Mode
Commands chapter and the HSS Peer Service Configuration Mode Commands chapter.
Only one HSS peer service can be associated to a service. The HSS peer service should be configured prior to
issuing this command.
Only one HSS peer service can be associated to a service. The HSS peer service should be configured prior to
issuing this command.
ipne-service ipne_svc_name
Associates an IPNE service with this MME service.
ipne_svc_name
must be an alphanumeric string of 1 to 63 characters to identify a pre-configured, uniquely-
named IPNE service. For more information about the IPNE service, refer to the sections for the IPNE Service
Configuration Mode Commands and the IPNE Endpoint Configuration Mode Commands.
Configuration Mode Commands and the IPNE Endpoint Configuration Mode Commands.
location-service
location_svc_name
Associates a location service with this MME service. Only one location service should be associated with an
MME Service.
MME Service.
location_svc_name
specifies the name for a pre-configured location service to associate with the MME
service as an alphanumeric string of 1 through 64 characters. For more information about Location Services
(LCS), refer to the
(LCS), refer to the
location-service
command in the Context Configuration Mode Commands chapter
and the Location Services Configuration Mode Commands chapter.
lte-emergency-profile
profile_name
Associates an LTE emergency profile with this MME service.
profile_name
specifies the name for a pre-configured LTE emergency profile to associate with the MME
service as an alphanumeric string of 1 through 64 characters. For more information about the LTE emergency
profile, refer to the
profile, refer to the
lte-emergency-profile
command in the LTE Policy Configuration Mode Commands
chapter and the LTE Emergency Profile Configuration Mode Commands chapter.