Cisco Cisco Packet Data Gateway (PDG)
PCC-Action-Set Configuration Mode Commands
▀ rulebase-activate
▄ Command Line Interface Reference, StarOS Release 17
7550
rulebase-activate
This command sets an action to activate a pre-configured Rulebase in PCC-Action-Set configuration for PCC-Service
instance.
instance.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Action-Set Configuration
configure > context context_name > pcc-service service_name > action-set action_set_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcc-action-set)#
Syntax
[no] rulebase-activate rulebase_name [defer-by interval delayed_dur]
no
Removes the action to activate a pre-configured Rulebase from a PCC-Action-Set configuration instance for
PCC-Service configuration.
PCC-Service configuration.
rulebase_name
Specifies the name of the pre-configured Rulebase on PCEF for an activation action is set under PCC-Action-
Set configuration instance for PCC-Service configuration.
Set configuration instance for PCC-Service configuration.
rulebase_name
is a pre-configured Rulebase in PCEF.
defer-by
interval
delayed_dur
This optional keyword supports the time-of-day-based procedures under PCC-Action-Set instance by
configuring the relative time delay for Rulebase activation.
configuring the relative time delay for Rulebase activation.
delayed_dur
configures the relative delay time by which the corresponding Rulebase activation is deferred.
The action is triggered only when the time specified by
delayed_dur
is passed.
delayed_dur
specifies the delayed interval in
HH
MIN
SS
format.
Following format is used for
HH
MIN
SS
in
delayed_dur
:
HH
specifies the hour to defer the action trigger and must be an integer between 00 through 23.
MIN
specifies the minutes to defer the action trigger and must be an integer between 00 through 59.
SS
specifies the seconds to defer the action trigger and must be an integer between 00 through 59.
Usage
Use this command to set an action to activate a pre-configured Rulebase in PCC-Action-Set configuration for
PCC-Service instance.
Additionally
PCC-Service instance.
Additionally
defer-by
interval
keyword is used to configure relative time by which the corresponding
Rulebase activation is deferred.