Cisco Cisco Packet Data Gateway (PDG)
Peer Profile Configuration Mode Commands
▀ arp-mapping
▄ Command Line Interface Reference, StarOS Release 17
7926
arp-mapping
Configures UMTS ARP to Gx ARP mapping for the specific peer profile.
Product
GGSN
P-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Peer Profile Configuration
configure > peer-profile service-type <service-type> {default | name peer_profile_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-peer-profile-ggsn/pgw/sgw-access/nw)#
Syntax
[ default ] arp-mapping priority-level high high_num medium med_num
default
Sets default values for the peer profile
priority-level high
high_num
medium
high_num
Configures the high and medium values for peer profile. The
high_num
is an integer and ranges from 1 to 13
while the
high_num
also being an integer, ranges from 2 to 14.
Usage
Use this command to configure UMTS ARP to Gx ARP mapping for GGSN peer profile configured through
this mode.
this mode.
Example
The following command sets the high priority level 4 and low priority level 9 for UMTS to Gx ARP mapping
for a GGSN peer profile:
for a GGSN peer profile:
arp-mapping priority-level high 4 medium 9