Cisco Cisco Packet Data Gateway (PDG)
P-GW Service Configuration Mode Commands
▀ associate
▄ Command Line Interface Reference, StarOS Release 17
7944
associate
Associates the P-GW service with specific pre-configured services and/or policies configured in the same context.
Product
P-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > P-GW Service Configuration
configure > context context_name > pgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pgw-service)#
Syntax
associate { egtp-service name [ lma-service name ] | ggsn-service name | lma-service name
[ egtp-service name ] | peer-map map_name ] | qci-qos-mapping name }
[ egtp-service name ] | peer-map map_name ] | qci-qos-mapping name }
no associate { egtp-service | lma-service | peer-map | qci-qos-mapping }
no
Removes the selected association from this service.
egtp-service name [ lma-service name ] | lma-service name [ egtp-service name ]
egtp-service
name [ lma-service name ]
: Specifies that the P-GW service is to be associated with
an existing eGTP service within this context.
name
must be an alphanumeric string of 1 through 63 characters and be an existing eGTP service.
Configure an associated LMA service name to support handoffs between PMIPv6 and GTP.
name
must be an
alphanumeric string of 1 through 63 characters and be an existing LMA service.
lma-service
name [ egtp-service name ]
: Specifies that the P-GW service is to be associated with
an existing LMA service within this context.
name
must be an alphanumeric string of 1 through 63 characters and be an existing LMA service.
Configure an associated eGTP service name to support handoffs between PMIPv6 and GTP.
name
must be an
alphanumeric string of 1 through 63 characters and be an existing eGTP service.
ggsn-service name
Specifies that the P-GW service is to be associated with an existing GGSN service within this context.
name
must be an alphanumeric string of 1 through 63 characters and be an existing GGSN service.
peer-map map_name
Specifies that the P-GW service is to be associated with an existing peer map within this context.
map_name
must be an alphanumeric string of 1 through 63 characters and be an existing peer map.
Refer to the LTE Policy Configuration Mode Commands chapter for more information on peer map creation.