Cisco Cisco Packet Data Gateway (PDG)

Página de 8994
SaMOG Service Configuration Mode Commands   
▀  associate 
 
 
▄  Command Line Interface Reference, StarOS Release 17 
8296 
   
associate 
SaMOG associates another service to this SAMOG service. 
Product
 
SaMOG 
Mode
 
Exec > Global Configuration > Context Configuration > SAMOG Service Configuration 
configure > context context_name > samog-service samog_service_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-samog-service)# 
Syntax
 
associate { cgw-service cgw_service_name | dhcp-service dhcp_service_name | mrme-service 
mrme_service_name | subscriber-map subscriber_map_name } 
no  associate { cgw-service | dhcp-service | dhcpv6-service | mrme-service | subscriber-
map }
 
no
 
Disables the association of the service with the SaMOG service. 
The 
no associate dhcp-service
 command does not disassociate existing sessions, and only new 
sessions will not be established. Existing sessions continue to use the DHCPv4 service to which it was bound 
during session establishment. 
cgw-service
 
cgw_service_name
 
The CGW service should be configured before associating the same with SaMOG service.  
cgw_service_name
 must be an alphanumeric string between 1 and 63 characters. 
dhcp-service dhcp_service_name 
 
Specifies the DHCPv4 service to associate with the SaMOG service. DHCPv4 is optional while starting an 
SaMOG service. 
dhcp_service_name
 must be an alphanumeric string from 1 through 63. 
While the association of the DHCPv4 service with the SaMOG service is optional, DHCPv4 service must be 
associated with the SaMOG service for the SaMOG Ethernet over GRE (EoGRE) feature to function. If no 
DHCPv4 service is configured and associated, and at least one EoGRE access type Radius client exist, the 
output of the 
show configuration errors
 command will display a warning under the SaMOG service 
system errors section. 
Important:
  The associated DHCPv4 service must not be used for any service other than SaMOG, as packets are 
always forwarded over the EoGRE tunnel only. 
mrme-service mrme_service_name
 
The MRME service should be configured before associating the same with SaMOG service.  
mrme_service_name
 must be an alphanumeric string from 1 through 63 characters.