Cisco Cisco Packet Data Gateway (PDG)
SGSN Global Configuration Mode Commands
bssgp-timer ▀
Command Line Interface Reference, StarOS Release 17 ▄
8431
bssgp-timer
Configures the T2 and TH timers for the BVCs (BSSGP virtual connections) of the NSE (network service entities).
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SGSN Global Configuration
configure > sgsn-global
Entering the above command sequence results in the following prompt:
[local]host_name(config-sgsn-global)#
Syntax
bssgp-timer { t2 T2_time | th TH_time }
default bssgp-timer { t2 | th }
default
Resets the specified timers to default settings.
t2 T2_time
Configures the BVC reset guard timer (at the BSSGP layer) in units of 1 second.
T2_time
: Enter an integer from 1 to 120. Default is 30 seconds.
th TH_time
Configures, at the BSSGP layer, the MS flow control parameter validity timeouts in units of 1 second.
TH_time
: Enter an integer from 6 to 5999. Default is 500 seconds.
Usage
Use this command to configure timer timeout values for MS flow control and BVC reset timers that control
BVCs for the NSEs.
BVCs for the NSEs.
Example
Set the TH timeout for
20
seconds:
bssgp-timer th 20