Cisco Cisco Packet Data Gateway (PDG)
SSH Configuration Mode Commands
▀ subsystem
▄ Command Line Interface Reference, StarOS Release 17
8676
subsystem
Configures the system to perform file transfers using Secure FTP (SFTP) over ssh v2. Administrators must be
configured with the FTP attribute privilege to issue this command. This command also supports creation of SFTP
subsystem root directories with access privileges. Administrators can assign an SFTP subsystem to local users.
configured with the FTP attribute privilege to issue this command. This command also supports creation of SFTP
subsystem root directories with access privileges. Administrators can assign an SFTP subsystem to local users.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > SSH Configuration
configure > context context_name > server sshd
Entering the above command sequence results in the following prompt:
[local]host_name(config-sshd)#
Syntax
subsystem { cli | sftp [ name sftp_name root-dir pathname mode { read-only | readwrite }
] }
] }
no subsystem { cli | sftp }
no subsystem sftp name stfp_name
no
Disables the SFTP ssh file transfer method or access to the CLI via ssh or a specified SFTP subsystem.
Important:
An SFTP subsystem can only be removed if the subsystem is not currently assigned to any local user.
cli
Default: Enabled
Configures the SSH system for the current context to allow access to the CLI.
Configures the SSH system for the current context to allow access to the CLI.
sftp
Default: Disabled
Enables the SSH system for the current context to perform file transfers using Secure FTP (SFTP) over ssh
v2.
Enables the SSH system for the current context to perform file transfers using Secure FTP (SFTP) over ssh
v2.
name
sftp_name
Assigns a name for this SFTP subsystem. sftp_name is an alphanumeric string that uniquely identifies this
subsystem.
subsystem.
root-dir
pathname
Specifies the root directory to which SFTP files can be transferred. Options include: