Cisco Cisco Packet Data Gateway (PDG)
APN Configuration Mode Commands
▀ qci
▄ Command Line Interface Reference, StarOS Release 16
1400
qci
Specifies the QoS Class Index (QCI) value to be used to mark bearers classified as IMS media for preferential treatment
during session recovery and ICSR switchover.
during session recovery and ICSR switchover.
Product
GGSN
P-GW
S-GW
SAE-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
qci value_bytes ims-media
no qci value_bytes ims-media
no
Disables this IMS QCI feature.
ims-media
Marks bearers classified as IMS media for preferential treatment during session recovery and ICSR
switchover.
switchover.
value_bytes
Specifies the QCI value an integer from 1 through 254.
Usage
Use this command to specify the QCI value to be used to mark bearers classified as IMS media for
preferential treatment during session recovery and ICSR switchover.
The following prerequisites apply to the implementation of this feature:
preferential treatment during session recovery and ICSR switchover.
The following prerequisites apply to the implementation of this feature:
A dedicated APN must be reserved for VoLTE traffic.
A call connected to this APN will not be classified as Active VoLTE unless there is a dedicated bearer
matching the VoLTE-configured QCI.
Preferential treatment would be given to only those calls which are active VoLTE.