Cisco Cisco Packet Data Gateway (PDG)

Página de 8770
APN Configuration Mode Commands   
▀  timeout idle 
 
 
▄  Command Line Interface Reference, StarOS Release 16 
1426 
   
timeout idle 
Configures the idle timeout duration for the long duration timer associated with a subscriber session. 
Product
 
All 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > APN Configuration 
configure > context context_name > apn apn_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-apn)# 
Syntax
 
timeout idle idle_dur 
[ default | no ] timeout idle 
default | no
 
Indicates the timeout specified is to be returned to its default behavior. If no specific timeout is specified, then 
all are set to their default behavior. 
idle_dur
 
Default: 0 
Designates the maximum duration of the session (in seconds). After expiry the system considers the session 
as dormant or idle and terminates the session. 
idle_dur
 must be an integer value in the range from 0 through 4294967295. 
The special value 0 disables the timeout specified. 
Usage 
Use this command to set the idle time duration for subscriber session to determine the dormant session. 
Refer to the 
long-duration-action detection
 and 
long-duration-action disconnection
 
command in this chapter for additional information. 
Example
 
Following command sets the idle timeout duration to 
450
 seconds. 
timeout idle 450