Cisco Cisco Packet Data Gateway (PDG)
APN Profile Configuration Mode
associate quality-of-service-profile ▀
Command Line Interface Reference, StarOS Release 16 ▄
1457
associate quality-of-service-profile
Associates the specified Quality of Service profile with the APN profile.
Product
SGSN
Privilege
Administrator
Mode
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(apn-profile-profile_name)#
Syntax
associate quality-of-service-profile <qos_profile_name> access-type [ gprs | umts ]
remove associate quality-of-service-profile access-type [ gprs | umts ]
remove
Removes the association of the specified Quality of Service profile with the APN profile.
access-type
The access-types listed below are configured through this command:
gprs
umts
qos_profile_name
The name of the Quality of Service profile to be associated with the APN profile.
Usage
This command is used to associate the specified Quality of Service profile with the APN profile. The access-
type must be configured as either
type must be configured as either
gprs
or
umts
.
Example
Use this command to associate a Quality of Service Profile named
test
in an UMTS network with the APN
profile.
associate quality-of-service-profile test access-type umts