Cisco Cisco Packet Data Gateway (PDG)
Command Line Interface Reference, StarOS Release 16 ▄
1537
Chapter 26
ATM Port Configuration Mode Commands
The Asynchronous Transfer Mode (ATM) port configuration mode provides the commands to create, configure, bind,
and manage the ATM ports on line cards that support ATM, such as the ATM/POS OC-3 single-mode and multi-mode
optical line cards.
and manage the ATM ports on line cards that support ATM, such as the ATM/POS OC-3 single-mode and multi-mode
optical line cards.
Important:
Before using these commands, card framing should be configured for either SDH or SONET with the
framing command described in the Card Configuration Mode chapter.
Mode
Exec > Global Configuration > ATM Port Configuration
configure > port atm slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-port-slot_number/port_number)#
Important:
The commands or keywords/variables that are available are dependent on platform type, product
version, and installed license(s).