Cisco Cisco Packet Data Gateway (PDG)
BGP Configuration Mode Commands
▀ address-family vpnv4
▄ Command Line Interface Reference, StarOS Release 16
1602
address-family vpnv4
Configures the VPNv4 Address Family information for the specified BGP AS number.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > BGP Configuration
configure > context context_name > router bgp as_number
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-bgp)#
Syntax
address-family vpnv4
address-family vpnv4
Enters the BGP Address-Family VPNv4 mode to allow entry of VPN BGP parameters for the BGP AS
number.
number.
Usage
Use this command to configure the VPNv4 address family configuration parameters for BGP router. This
command is also used to switch the command mode to enter the BGP Address Family Configuration Mode.
Use of
command is also used to switch the command mode to enter the BGP Address Family Configuration Mode.
Use of
address-family vpnv4
command switches the command mode to BGP Address Family
Configuration Mode; the CLI prompt changes to:
[context_name>]host_name(config-bgp-af-vpnv4)#
Example
Use the following command to enter the BGP Address-Family configuration mode for VPNv4 address
parameters:
parameters:
address-family vpnv4