Cisco Cisco Packet Data Gateway (PDG)
AAA Server Group Configuration Mode Commands
radius authenticator-validation ▀
Command Line Interface Reference, StarOS Release 16 ▄
195
radius authenticator-validation
This command enables/disables the MD5 authentication of RADIUS user. MD5 authentication is enabled by default.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > AAA Server Group Configuration
configure > context context_name > aaa group group_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-aaa-group)#
Syntax
[ default | no ] radius authenticator-validation
no
Disables MD5 authentication validation for an Access-Request message to the AAA server.
Usage
Use this command to disable or re-enable, sending Access-Request messages to the AAA server for MD5
validation.
validation.
Example
The following command disables MD5 authentication validation for Access-Request messages for user
names (NAI):
names (NAI):
no radius authenticator-validation
The following command enables MD5 authentication validation for Access-Request messages for user names
(NAI):
(NAI):
radius authenticator-validation