Cisco Cisco Packet Data Gateway (PDG)
Call Control Profile Configuration Mode
lte-zone-code ▀
Command Line Interface Reference, StarOS Release 16 ▄
1957
lte-zone-code
Configures the enforcement of allowed or restricted zone code lists and associates an EPS Mobility Management
(EMM) cause code to rejected attach attempts.
(EMM) cause code to rejected attach attempts.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
lte-zone-code [ allow | restrict } { emm-cause-code { eps-service-not-allowed-in-this-
plmn | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-allowed-in-
this-tracking-area | tracking-area-not-allowed ] zone-code-list zc_id +
plmn | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-allowed-in-
this-tracking-area | tracking-area-not-allowed ] zone-code-list zc_id +
remove lte-zone-code zone-code-list
remove
Removes the zone code list from the call control profile.
[ allow | restrict ]
Specifies whether the zone code list is allowed or restricted.
Important:
You can only create an allowed or restricted list, not both.
emm-cause-code [ eps-service-not-allowed-in-this-plmn | no-suitable-cell-in-
tracking-area | plmn-not-allowed | roaming-not-allowed-in-this-tracking-area |
tracking-area-not-allowed ]
tracking-area | plmn-not-allowed | roaming-not-allowed-in-this-tracking-area |
tracking-area-not-allowed ]
Optionally, specify one of the following EMM cause codes to apply when a UE request is rejected:
eps-service-not-allowed-in-this-plmn
no-suitable-cell-in-tracking-area
plmn-not-allowed
roaming-not-allowed-in-this-tracking-area
tracking-area-not-allowed
zone-code-list zc_id +
Specifies the zone code in the allowed or restricted list of zone codes.
zone_code
must be an integer value
from 0 to 65535.