Cisco Cisco Packet Data Gateway (PDG)
CGW Service Configuration Mode Commands
▀ bind
▄ Command Line Interface Reference, StarOS Release 16
2162
bind
This command binds ip-address for LMA driver.
Product
SaMOG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > CGW Configuration
configure > context context_name > cgw-service cgw_service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cgw-service)#
Syntax
bind { ipv4-address ipv4_address [ ipv6-address ipv6_address ] | ipv6-address
ipv6_address }
ipv6_address }
no bind { ipv4-address ipv4_address [ ipv6-address ipv6_address ] | ipv6-address
ipv6_address }
ipv6_address }
no
Disables binding.
bind ipv4-address
ipv4_address
Designates the address of the LMA service. This must be followed by IPv4 address.
ipv4_address
is IPv4 address, using dotted-decimal notation.
bind ipv6-address
ipv6_address
Designates an IPv6 address. This must be followed by IPv6 address.
ipv6_address
is IPv4 address, using dotted-decimal notation.
Usage
Use this command to bind ip-address for lma driver.
Example
The following command binds an IPv4 address for lma driver.
bind ipv4-address 1.2.3.4