Cisco Cisco Packet Data Gateway (PDG)
Context Configuration Mode Commands N-R
radius accounting apn-to-be-included ▀
Command Line Interface Reference, StarOS Release 16 ▄
2605
radius accounting apn-to-be-included
This command configures the Access Point Name (APN) to be included for RADIUS accounting.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
radius accounting apn-to-be-included { gi | gn }
default radius accounting apn-to-be-included
default
Configures the default setting.
gi
Specifies the usage of the Gi APN name in the RADIUS accounting request. The Gi APN represents the APN
received in the Create PDP context request message from the SGSN.
received in the Create PDP context request message from the SGSN.
gn
Specifies the usage of the Gn APN name in the RADIUS accounting request. The Gn APN represents the
APN selected by the GGSN.
APN selected by the GGSN.
Usage
Use this command to configure the APN name for RADIUS Accounting. This can be set to either gi or gn.
Example
The following command specifies the usage of Gn APN name in the RADIUS accounting request:
radius accounting apn-to-be-included gn