Cisco Cisco Packet Data Gateway (PDG)
CSCF Service Configuration Mode Commands
threshold ▀
Command Line Interface Reference, StarOS Release 16 ▄
3239
threshold
Enables thresholds alerting and configuration of thresholds for CSCF Service.
Product
SCM
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Service Configuration
configure > context context_name > cscf service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cscf-service)#
Syntax
threshold { { call-setup-failures | call-total-active | error-no-resource | error-
presence | error-reg-auth | error-tcp | invite-rcvd-rate | monitoring | reg-rcvd-rate |
reg-total-active | route-failures } high_thresh [ clear low_thresh ] | monitoring }
presence | error-reg-auth | error-tcp | invite-rcvd-rate | monitoring | reg-rcvd-rate |
reg-total-active | route-failures } high_thresh [ clear low_thresh ] | monitoring }
[ default | no ] threshold monitoring
default
Returns the command to the default settings.
no
Disables thresholds alerting for CSCF Service.
{ call-setup-failures | call-total-active | error-no-resource | error-presence |
error-reg-auth | error-tcp | invite-rcvd-rate | reg-rcvd-rate | reg-total-active
| route-failures } high_thresh clear
error-reg-auth | error-tcp | invite-rcvd-rate | reg-rcvd-rate | reg-total-active
| route-failures } high_thresh clear
low_thresh
call-setup-failures
: Number of CSCF call setup failures.
Default: 0
call-total-active
: Number of total active CSCF calls.
Default: 0
error-no-resource
: Number of CSCF call setup failures due to no-resource.
Default: 0
error-presence
: Number of CSCF Presence errors.
Default: 0
error-reg-auth
: Number of CSCF Registration Authentication failures.
Default: 0
error-tcp
: Number of CSCF call setup failures due to TCP error.
Default: 0
invite-rcvd-rate
: Number of CSCF calls per polling interval.
Default: 0
reg-rcvd-rate
: Number of CSCF registrations per polling interval.
Default: 0