Cisco Cisco Packet Data Gateway (PDG)

Página de 8770
  DHCP Service Configuration Mode Commands 
lease-time  ▀   
 
Command Line Interface Reference, StarOS Release 16  ▄  
 
   
3375 
lease-time 
Configures the local DHCP Server lease time in seconds. 
Product
 
ASN-GW 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > DHCP Service Configuration 
configure > context context_name > dhcp-service service_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-dhcp-service)# 
Syntax
 
lease-time time 
default lease-time 
default
 
Returns the command to its default setting of 600. 
time
 
Specifies the IP address lease time from the local DHCP server (in seconds) as an integer from 600 through 
4294967295. Default: 600 
Usage 
Use this command to configure the lease time of the IP address from the local DHCP server 
Example
 
The following command sets the lease time of the IP address from the local DHCP server to 20 minutes 
(1200 seconds): 
lease-time 1200