Cisco Cisco Packet Data Gateway (PDG)
EDR Format Configuration Mode Commands
rule-variable ▀
Command Line Interface Reference, StarOS Release 16 ▄
3531
version
x-header
: extension header
ad-delivered
,
ad-replaced
,
compression-bytes-in
,
compression-bytes-out
,
dns-resolution-locally
,
dns-resolution-remotely
,
tpo-enabled
Important:
The Traffic Performance Optimization (TPO) in-line service
is not supported in this release.
icmp
: Internet Control Message Protocol (ICMP) related fields:
code
: ICMP code
type
: ICMP type
icmpv6
: Internet Control Message Protocol Version 6 (ICMPv6) related fields:
code
: ICMPv6 code
type
: ICMPv6 type
imap
: Internet Message Access Protocol (IMAP) related fields:
cc
: IMAP e-mail CC field
command
: IMAP command
content
date
: IMAP e-mail Date field
final-reply
: IMAP final reply
from
: IMAP e-mail From field
mail-size
: IMAP size of e-mail in RFC822 format
mailbox-size
: IMAP number of e-mails in the mailbox
message-type
: IMAP message type
previous-state
: IMAP session previous state
session-length
: IMAP session length
session-previous-state
: IMAP session previous state
session-state
: IMAP session state
state
: IMAP state
subject
: IMAP e-mail Subject field
to
: IMAP e-mail To field
ip
: Internet Protocol (IP) related fields:
dst-address
: destination IP address
protocol
: Protocol being transported by IP packet
server-ip-address
: IP address of server. This field in EDR contains either the IPv4 or
IPv6 address of the server for a particular flow (flow level). The maximum length of this
field is 48 characters. For an IPv6 address, the maximum length is 45 characters; for an
IPv4 address, the maximum length is 15 characters.
field is 48 characters. For an IPv6 address, the maximum length is 45 characters; for an
IPv4 address, the maximum length is 15 characters.
src-address
: Source IP address