Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Commands (A-C)
card migrate ▀
Command Line Interface Reference, StarOS Release 16 ▄
3681
card migrate
Migrates StarOS processes from an active packet processing card to a standby packet processing card. (ASR 5x00 only)
Product
All
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
card migrate from src_slot to dst_slot [ -noconfirm ]
src_slot
Indicates the slot number of the packet processing card from which processes will be migrated. The packet
processing card in this slot must be in Active mode.
processing card in this slot must be in Active mode.
dst_slot
Indicates the slot number of the packet processing card to which processes will be migrated.
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
Usage
This command allows an operator to move processes from an active to a standby packet processing card.
Example
The following will cause processes currently running on the card in slot 8 to migrate to the standby card in
slot 9. The migration will not occur if any warnings are generated.
slot 9. The migration will not occur if any warnings are generated.
card migrate from 8 to 9