Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Commands (D-S)
▀ gtpp interim now
▄ Command Line Interface Reference, StarOS Release 16
3982
gtpp interim now
Check points current GTPP accounting messages and identifies which types of interim CDRs are to be generated and
sent to the external charging/storage servers (for example, a CFG or a GSS). The impact of this command is immediate.
sent to the external charging/storage servers (for example, a CFG or a GSS). The impact of this command is immediate.
Product
GGSN
SGSN
SGW
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
gtpp interim now [ active-charging egcdr | apn apn_name | callid call_id | cdr-types {
gcdr | mcdr | scdr } | dhcp-server ip_address | gprs-service svc_name | ggsn-address
gcdr | mcdr | scdr } | dhcp-server ip_address | gprs-service svc_name | ggsn-address
ggsn_ip_addr | ggsn-service svc_name | imsi imsi [ ip-address sub_address [ username name
] ] | ip-addresssub-address | nsapi nsapi [ ip-address sub-address [ username name ] ] |
ip-pool pool_name | mcc mcc_number mnc mnc_number | msisdn msisdn_num | sgsn-address
ip_address | sgsn-service svc_name | username name ] +
] ] | ip-addresssub-address | nsapi nsapi [ ip-address sub-address [ username name ] ] |
ip-pool pool_name | mcc mcc_number mnc mnc_number | msisdn msisdn_num | sgsn-address
ip_address | sgsn-service svc_name | username name ] +
active-charging
This feature is specific to the GGSN and is documented separately. .
apn
apn_name
Initiates GTPP interim accounting for all PDP contexts accessing the APN specified as an alphanumeric
string of 1 through 62 characters that is case sensitive.
string of 1 through 62 characters that is case sensitive.
callid
call_id
Identifies a specific call id as an 8-digit hexadecimal number.
cdr-types { mcdr | scdr }
Specifies the CDR types to be generated by the SGSN:
gcdr
- Instructs the GGSN to only generate G-CDRs.
mcdr
- Instructs the SGSN to only generate M-CDRs
scdr
- Instructs the SGSN to only generate S-CDRs.
This keyword is specific to the SGSN.
dhcp-server
ip_address
Identifies the DHCP server where the IP address (defined with the
ip address
keyword) was allocated by
the IP address of the DHCP server entered using IPv4 dotted-decimal notation.