Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Commands (D-S)
save logs ▀
Command Line Interface Reference, StarOS Release 16 ▄
4073
save logs
Saves the current log file to a local or remote location.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
save logs { url } [ active ] [ inactive ] [ callid call_id ] [ event-verbosity
evt_verboseness ] [ facility facility ] [ level severity_level ] [ pdu-data pdu_format ]
[ pdu-verbosity pdu_verboseness ] [ since from_date_time [ until to_date_time ] ] [ | {
grep grep_options | more } ]
evt_verboseness ] [ facility facility ] [ level severity_level ] [ pdu-data pdu_format ]
[ pdu-verbosity pdu_verboseness ] [ since from_date_time [ until to_date_time ] ] [ | {
grep grep_options | more } ]
url
Specifies the location to store the log file(s).
url
may refer to a local or a remote file and must be entered in
the following format.
For the ASR 5000:
For the ASR 5000:
[ file: ] { /flash | /pcmcia1 | /hd-raid } [ /directory ] /file_name
tftp:// { host [ : port# ] } [ /directory ] /file_name
[ ftp: | sftp: ] // [ username[ :password ] @ ] { host } [ : port# ] [
/directory ] / file_name
/directory ] / file_name
Important:
Use of the SMC hard drive is not supported in this release.
For the ASR 5500:
[ file: ] { /flash | /usb1 | /hd-raid } [ /directory ] /file_name
tftp:// { host [ : port# ] } [ /directory ] /file_name
[ ftp: | sftp: ] // [ username[ :password ] @ ] { host } [ : port# ] [
/directory ] / file_name
/directory ] / file_name
For VPC:
[ file: ] { /flash | /hd-raid | /usb1 | /usb2 | /cdrom1 } [ /directory ]
/file_name
/file_name
tftp:// { host [ : port# ] } [ /directory ] /file_name