Cisco Cisco Packet Data Gateway (PDG)
Exec Mode show Commands (M-P)
▀ show ntp
▄ Command Line Interface Reference, StarOS Release 16
4676
show ntp
Displays the network timing protocol (NTP) associations and status.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show ntp { associations | status } [ address ip_address ] [ | { grep grep_options | more
} ]
} ]
associations
Displays the current NTP server associations and related statistics.
status
Displays the client permeates configured and the synchronization status.
address
ip_address
Specifies the IP address of an NTP server/client in the current context in IPv4 dotted-decimal notation.
| { grep grep_options | more }
Pipes (sends) the output of the command to the command specified. You must specify a command to which
the output will be sent.
For details on the usage of
the output will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
View network timing protocol information to troubleshooting system clock issues by displaying the
associations and status of the local NTP client.
associations and status of the local NTP client.
Example
The following displays the NTP associations and status, respectively.
show ntp associationsshow ntp status
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.