Cisco Cisco Packet Data Gateway (PDG)
ACS Configuration Mode Commands
▀ nat unsolicited-pkts
▄ Command Line Interface Reference, StarOS Release 16
508
nat unsolicited-pkts
This command allows you to configure unsolicited packets.
Product
ACS
NAT
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration
active-charging service service_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs)#
Syntax
nat unsolicited-pkts { icmp-host-unreachable { max-rate packets_num } | server-list {
max-limit servers_num } }
max-limit servers_num } }
[ default | no ] nat unsolicited-pkts { icmp-host-unreachable | server-list }
default
Configures this command with its default setting.
Default: Disabled
Default: Disabled
no
Configures this command with its default setting.
icmp-host-unreachable max-rate packets_max
Configures the maximum number of allowed ICMP response packets, in seconds.
packets_max
must be an integer from 1 through 100.
server-list max-limit servers_num
Configures the maximum number of servers to be stored per Session Manager instance.
servers_num
must be an integer from 2 through 50.
Usage
Use the following command to configure the number of allowed ICMP responses and the number of servers
where most number of unsolicited packets are received.
where most number of unsolicited packets are received.
Example
The following command configures the number of allowed ICMP responses per second to
10
:
nat unsolicited-pkts host-unreachable max-rate 10
The following command configures the number of servers to be stored as
20
:
nat unsolicited-pkts server-list max-limit 20