Cisco Cisco Packet Data Gateway (PDG)

 

This command configures the session management (SM) parameters associated with this particular GPRS service 
context. 

 

SGSN 

 

Security Administrator, Administrator 

 

Exec > Global Configuration > Context Configuration > GPRS Service Configuration 

configure > context context_name > gprs-service service_name

 

Entering the above command sequence results in the following prompt: 

[context_name]host_name(config-gprs-service)# 

 

sm { activate-max-retransmissions num_retries | deactivate- max-retransmissions 
num_retries | guard-timer guard_seconds | ignore-pco-decode-error | modify-max-
retransmissions num_retries | partial-apn-match  | radio-priority from-arp arp-
rp_prof_name| requested-apn-from-first-subrec | t3385-timeout secs | t3386-timeout  secs 
| t3395-timeout  secs | t3396 min minimum max maximum cause cause_code | trim-trailing-
spaces-in-apn } 

default sm { activate-max-retransmissions | deactivate-max-retransmissions | ignore-pco-
decode-error | modify-max-retransmissions | t3385-timeout | t3386-timeout | t3395-timeout 
| trim-trailing-spaces-in-apn } 

no sm { ignore-pco-decode-error | radio-priority from-arp | partial-apn-match | radio-
priority | requested-apn-from-first-subrec | t3396 | trim-trailing-spaces-in-apn }  

 

Resets the SM parameters to their defaults. 

 

Removes the identified parameter configuration from the GPRS Service configuration. 

activate-max-retransmissions num_retries

 

Defines the maximum number of retries to transmit ‘activate PDP context request’. 

 : Must be an integer from 1 to 10.  

Default: 4 

 

Defines the maximum number of retries to transmit ‘deactivate PDP context request’. 

 : Must be an integer from 1 to 10. 

Default: 4