Cisco Cisco Packet Data Gateway (PDG)
HLR Configuration Mode Commands
▀ release-compliance
▄ Command Line Interface Reference, StarOS Release 16
6212
release-compliance
Enables/disables the sending of EPS information in the Update GPRS Location Request message to the HLR.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > MAP Service Configuration > HLR Configuration
configure > context context_name > map-service service_name > hlr
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-map-service-service_name-hlr)#
Syntax
release-compliance release-8
no release-compliance
release-compliance release-8
Enables the sending of EPS information in the UGL Request message to the HLR. This setting sets the 3GPP
release compliance to Release 8 and above.
release compliance to Release 8 and above.
no release-compliance
Disables the sending of EPS information in the UGL Request message to the HLR. This command sets the
3GPP release compliance setting to Pre-release 8. This is the default setting.
3GPP release compliance setting to Pre-release 8. This is the default setting.
Usage
Use this command to enable or disable the sending of EPS information in the UGL Request message to the
HLR.
Operators can use the
HLR.
Operators can use the
show map-service all
command to view the current 3GPP release compliance
setting.
Example
This command enables the sending of EPS information in the UGL Request message to the HLR.
release-compliance release-8