Cisco Cisco Packet Data Gateway (PDG)
HNB-GW Service Configuration Mode Commands
▀ sctp connection-timeout
▄ Command Line Interface Reference, StarOS Release 16
6290
sctp connection-timeout
Configures the SCTP connection timeout duration to explicitly remove the SCTP association with a non-responsive
HNB in an HNB-GW service.
HNB in an HNB-GW service.
Platform
ASR 5000
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HNB-GW Service Configuration
configure > context context_name > hnbgw-service service_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-hnbgw-service)#
Syntax
sctp connection-timeout dur
[ default | no ] sctp connection-timeout
no
Disables the connection time out configuration on HNB-GW service.
default
Restores the connection timeout duration value to its default value of 10 seconds.
dur
Sets the connection timeout duration (in seconds) after which the association is explicitly removed. In case of
an HNB de-registration scenario, the HNB-GW waits for configured amount time before initiating the
procedure to clear the SCTP association.
an HNB de-registration scenario, the HNB-GW waits for configured amount time before initiating the
procedure to clear the SCTP association.
dur
is an integer from 5 through 30. Default: 10
Usage
Use this command to configure the minimum duration value before removing the SCTP association between
a non-responding HNB and HNB-GW. If HNB registration not happened within the configured period after
the SCTP association is established then the SCTP association is explicitly removed. In a scenario where an
HNB de-registered due to any reason, the HNB-GW waits for the configured amount of time before initiating
the procedure to clear the SCTP association.
a non-responding HNB and HNB-GW. If HNB registration not happened within the configured period after
the SCTP association is established then the SCTP association is explicitly removed. In a scenario where an
HNB de-registered due to any reason, the HNB-GW waits for the configured amount of time before initiating
the procedure to clear the SCTP association.
Example
The following command sets the SCTP connection timeout duration to
15
second on HNB-GW after expiry
of which the SCTP association is removed:
sctp connection-timeout 15