Cisco Cisco Packet Data Gateway (PDG)
MME Service Configuration Mode Commands
▀ snmp trap
▄ Command Line Interface Reference, StarOS Release 16
7178
snmp trap
Enables or disables the SNMP trap for S1 interface connection establishment.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
[ default | no ] snmp trap { s1-initial-establishment | s1-path-establishment }
default
Returns the command to its default setting of disabled.
no
Disables the SNMP trap.
s1-initial-establishment
Specifies that the SNMP trap for the initial S1 interface connection establishment is to be enabled or disabled.
s1-path-establishment
Specifies that the SNMP trap for the S1 path establishment is to be enabled or disabled.
Usage
Use this command to enable or disabled the SNMP trap for S1 interface connection establishment.