Cisco Cisco Packet Data Gateway (PDG)
RNC Configuration Mode Commands
▀ ranap paging-cause-ie
▄ Command Line Interface Reference, StarOS Release 16
8000
ranap paging-cause-ie
This command sets the paging cause value and either includes or suppresses the Paging Cause IE in responses to Paging
Requests due to various sources. This command is available in releases 8.1 and higher.
Requests due to various sources. This command is available in releases 8.1 and higher.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > luPS Service Configuration > RNC Configuration
configure > context context_name > iups-service service_name > rnc id rnc_id
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-iups-service-rnc)#
Syntax
ranap { paging-cause-ie { all | background-data [ value ] | conversational-data [ value ]
| gmm-signalling [ value ] | gs-signalling [ value ] | interactive-data [ value ] | mme-
signalling [ value ] | sm-signalling [ value ] | sms-signalling [ value ] | streaming-
data [ value ] }
| gmm-signalling [ value ] | gs-signalling [ value ] | interactive-data [ value ] | mme-
signalling [ value ] | sm-signalling [ value ] | sms-signalling [ value ] | streaming-
data [ value ] }
[ default | no ] ranap { paging-cause-ie { all | background-data | conversational-data |
gmm-signalling | gs-signalling | interactive-data | mme-signalling | sm-signalling | sms-
signalling | streaming-data }
gmm-signalling | gs-signalling | interactive-data | mme-signalling | sm-signalling | sms-
signalling | streaming-data }
default
Resets the specific parameters value to default.
no
Suppresses the Paging Cause IE so that it is not included in responses to Paging Requests from respective
sources.
sources.
all
Using
all
sets the action for the Paging Cause IE value for all paging due to all sources.
background-data
[
value
]
Default: 3 (terminating background call)
Set the Paging Cause IE value for paging due to background data.
Set the Paging Cause IE value for paging due to background data.
value
: Must be an integer from 0 to 5. See Paging Cause value mapping in Usage section.
conversational-data [ value
]
Default: 5 (terminating high priority signaling)
Set the Paging Cause IE value for paging due to conversational data.
Set the Paging Cause IE value for paging due to conversational data.
value
: Must be an integer from 0 to 5. See Paging Cause value mapping in Usage section.