Cisco Cisco Packet Data Gateway (PDG)
SCTP Parameter Template Configuration Mode Commands
▀ sctp-max-in-strms
▄ Command Line Interface Reference, StarOS Release 16
8174
sctp-max-in-strms
Configures the maximum number of incoming SCTP streams.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > SCTP Parameter Template Configuration
configure > sctp-param-template template_name
Entering the above command sequence results in the following prompt:
[local]host_name(sctp-param-template)#
Syntax
sctp-max-in-strms value
default sctp-max-in-strms
default
Returns the command to its default setting of 16.
value
Specifies the maximum number of incoming SCTP streams as an integer from 1 through 16. Default: 16.
The MME restricts the allowable range as 2-16. If a value of 1 is entered, value 2 will be applied for any
MME service associated with this SCTP parameter template.
The MME restricts the allowable range as 2-16. If a value of 1 is entered, value 2 will be applied for any
MME service associated with this SCTP parameter template.
Usage
Use this command to configure the maximum number of incoming SCTP streams.
Example
The following command configures the maximum number of incoming SCTP streams to
5
:
sctp-max-in-strms 5