Cisco Cisco Packet Data Gateway (PDG)
Subscriber Configuration Mode Commands
dhcp parameter-request-list-option ▀
Command Line Interface Reference, StarOS Release 16 ▄
8513
dhcp parameter-request-list-option
Enables the sending of DHCP parameter request list option(s) in all outgoing messages for this subscriber.
Product
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
[ no ] dhcp parameter-request-list-option [ options ]
no
Disables the sending of DHCP parameter request list option(s) in all outgoing messages.
options
Specifies the value of particular DHCP parameter request list option(s).
options
must be an integer from 1 through 254.
Important:
Multiple options may be selected in the same command.
Usage
Use this command to enable or disable the sending of DHCP parameter request list option(s) in all outgoing
messages for this subscriber.
messages for this subscriber.
Example
The following command enables DHCP parameter request list option inclusion in outgoing messages:
dhcp parameter-request-list-option