Cisco Cisco Packet Data Gateway (PDG)
Subscriber Configuration Mode Commands
mobile-ip send bsid ▀
Command Line Interface Reference, StarOS Release 16 ▄
8579
mobile-ip send bsid
Enables the sending of the BSID (Base Station Identifier) of the WiFi access point/Radio Access Network (RAN) to the
HA in a PMIP RRQ (Register Request) message.
HA in a PMIP RRQ (Register Request) message.
Product
PDIF
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
[ default | no ] mobile-ip send bsid
default
Disables the support for sending the BSID to the HA in a PMIP RRQ.
This is the default mode.
This is the default mode.
no
Removes the configured support for sending the BSID to the HA in a PMIP RRQ.
Usage
Use this command to send the BSID to the HA in a PMIP RRQ.
Example
The following command enables sending the BSID to the HA in a PMIP RRQ:
mobile-ip send bsid