Cisco Cisco Packet Data Gateway (PDG)
GTPP Interface Configuration
▀ Configuring the GPRS Tunneling Protocol
▄ GTPP Interface Administration and Reference, StarOS Release 17
62
Configuring GTPP for S-GW
This section provides the GTPP configuration for S-GW.
1. At the subscriber level configure GTPP in the accounting-mode.
configure
context dest1
subscriber default
accounting-mode gtpp
end
2. At the context level configure the accounting policy. This is required only for time/tariff/volume threshold
configuration.
configure
context dest1
policy accounting lte
cc profile 1 interval 60
cc profile 1 volume total 100000
cc profile 1 tariff time 1 0 0 time 2 2 2 time 3 4 4 time 4 5 5
cc profile 1 buckets 3
cc profile 1 serving-nodes 4
end
3. Associate the accounting policy with the S-GW service.
configure
context source
sgw-service sgw1
associate accounting-policy lte
end
4. Configure the accounting context and GTPP group in S-GW service level. If accounting context is not
configured in S-GW service the source context and "default" GTPP group will be selected.
configure
context source