Cisco Cisco Packet Data Gateway (PDG)
S-GW CDR Field Descriptions
▀ CDR Fields
▄ GTPP Interface Administration and Reference, StarOS Release 16
374
PDP IPv4 Binary Address
The octet string included in the field described above includes the IPv4 address of the P-GW in binary
coding.
coding.
Format
Octet string
Length
4 bytes
Serving Node PLMN Identifier
This field denotes the PLMN identifier (MCC and MNC) of the P-GW used. This field is present in CDRs if the P-GW
PLMN-ID is available in the CSR message from Serving Node (MME).
PLMN-ID is available in the CSR message from Serving Node (MME).
The MCC and MNC are coded as described for “Routing Area Identity” in TS 29.060.
Format
Octet string
Serving Node Type
This field contains one or several serving node types in control plane of S-GW or P-GW, which have been connected during
the record. The serving node types listed here map to the serving node addresses listed in the field “Serving node Address” in
sequence.
the record. The serving node types listed here map to the serving node addresses listed in the field “Serving node Address” in
sequence.
The possible values are:
ServingNodeType ::= ENUMERATED
{
sGSN (0),
pMIPSGW (1),
gTPSGW (2),
ePDG (3),
hSGW (4),
mME (5)
}
NOTE: In the SGW-CDR, the possible values are SGSN(0) and MME(5).
Format
Sequence of serving Node Type
Length
Variable length format (Based on number of nodes connected during this period).