Cisco Cisco Packet Data Gateway (PDG)

Página de 74
  HeNB Gateway in Wireless LTE Network 
Features and Functionality - Base Software  ▀   
 
HeNB-GW Administration Guide, StarOS Release 17  ▄  
 
   
31 
 
In case henbgwmgr restart, overload stops will be sent to all overload flagged HeNBs in sessmgr. 
 
Automatic congestion control recovery: 
 
For each OCHL, a configurable guard timer will be started. If there is no overload stop received from 
the MME before the timer expires, overload stop will be sent to all corresponding HeNBs. 
 
Manual congestion control recovery: 
 
Henbgw will provide CLI command to send overload stops to all HeNBs in a OCHL of a MME. 
 
SoC compliance will be updated to S1AP specifications. 
DHCPv4 Proxy support for HeNBGW with IPSec 
The DHCPv4 proxy functionality on the SeGW integrated with HeNBGW is to update the DHCP messages with the 
HeNB Id in DHCP Option 61 (Client ID) and forward the DHCP messages to an external DHCP server. 
How DHCPv4 Proxy support for HeNBGW with IPSec works
 
1.  The SeGW forwards DHCP requests from a LTE FAP to an external DHCP server during IPSec Setup. 
2.  The SeGW adds LTE FAP Id in the Client Identifier (CID) of the DHCP messages. 
3.  The PNR then receives these DHCP requests maintains a mapping between the LTE FAP ID and the assigned 
"Inner" IP Address 
4.  The RMS queries the PNR to get the LTE FAP inner IP Address, to use this inner IP Address to send TR-069 
Connection Requests to the LTE FAP.