Cisco Cisco Packet Data Gateway (PDG)
• Buffer Full Packets Fwd:
• Buffer Full Bytes Fwd:
• Packets Forwarded:
• Bytes Forwarded:
If APN AMBR traffic shaping is disabled, the following output appears:
• APN AMBR Shaping:
• Downlink traffic-shaping: Disabled
• Uplink traffic-shaping: Disabled
Virtual APN Selection Based On PDP-Type
CSCuo61924 - Virtual APN based on PDP type.
Applicable Products: GGSN, P-GW, SAEGW
Feature Changes
The current implementation of selection of virtual APN is based on various criteria and a call received on a
selected APN can be forwarded to another APN based on the configured criteria. This feature enables the
operator to select the Virtual APN on the basis of PDP-type and PDP-type for roamers. For this, PDP-type
rules for PDP-types IPv4, IPv6, and IPv4v6 have been added to the existing Virtual APN rules. Also, roaming
mode-roaming has been implemented as a secondary option to PDP type to enable the operator to select the
Virtual APN on the basis on PDP-type for roamers.
selected APN can be forwarded to another APN based on the configured criteria. This feature enables the
operator to select the Virtual APN on the basis of PDP-type and PDP-type for roamers. For this, PDP-type
rules for PDP-types IPv4, IPv6, and IPv4v6 have been added to the existing Virtual APN rules. Also, roaming
mode-roaming has been implemented as a secondary option to PDP type to enable the operator to select the
Virtual APN on the basis on PDP-type for roamers.
Previous Behavior: Earlier, Virtual APN was selected on the basis on various factors such as IMSI and
MSISDN. PDP-type and PDP-type for roamers were not the basis for selection.
MSISDN. PDP-type and PDP-type for roamers were not the basis for selection.
New Behavior: Now, an existing CLI virtual-apn preference has been modified to enable the Virtual APN
selection on the basis of PDP-type and PDP-type for roamers.
selection on the basis of PDP-type and PDP-type for roamers.
Command Changes
virtual-apn preference
New keyword pdp-type has been added to the command virtual-apn preference to support Virtual APN
selection on the basis of PDP-type and PDP-type for roamers.
selection on the basis of PDP-type and PDP-type for roamers.
configure
context context_name
apn apn_name
virtual-apn preference priority apn apn_name [ access-gw-address { ip_address | ip_address/mask
} | bearer-access-service service_name | cc-profile cc_profile_index [ pre-rel-9.1-cc-behavior
cc_behavior_value ][ rat-type { eutran | gan | geran | hspa | utran | wlan } ] | cc-behavior cc_behavior_value
cc_behavior_value ][ rat-type { eutran | gan | geran | hspa | utran | wlan } ] | cc-behavior cc_behavior_value
[ rat-type { eutran | gan | geran | hspa | utran | wlan } ] | domain domain_name | mcc mcc_number mnc
mnc_number [ cc-profile cc_profile_index [ pre-rel-9.1-cc-behavior cc_behavior_value ] | cc-behavior
mnc_number [ cc-profile cc_profile_index [ pre-rel-9.1-cc-behavior cc_behavior_value ] | cc-behavior
cc_behavior_value | [ msin-range from msin_range_from to msin_range_to ] | [ rat-type { eutran | gan |
Release Change Reference, StarOS Release 19
280
P-GW Changes in Release 19
Virtual APN Selection Based On PDP-Type