Cisco Cisco Packet Data Gateway (PDG)
ECS Changes in Release 16
ECS Enhancements for 16.2 ▀
Release Change Reference, StarOS Release 16 ▄
111
Performance Indicator Changes
show active-charging service statistics
The following new counter has been added to the output of
show active-charging service statistics
command to report the number of ACS calls that were rejected due to no active rule.
No active rule in Rulebase/Subs
CSCup86339 - Assert sessmgr_ipv4.c:10235 :
sessmgr_ipv4_process_user_pkt_part2()
Applicable Products: GGSN, P-GW
Feature Changes
Processing of Data Packets in S2b Handoff for Dormant Bearer
Previous Behavior: During S2b handoff, DCCA was trying to send the bufferred data packets to session manager even
for a dormant bearer. Such dormant bearer existed only at ECS and not at session manager, and thereby resulting in
system crash.
for a dormant bearer. Such dormant bearer existed only at ECS and not at session manager, and thereby resulting in
system crash.
New Behavior: With the current implementation, after OCS response is received, it is verified to determine if the
bearer is in dormant state at ECS. If the bearer is found to be in dormant state, then such buffered packets will be
dropped.
bearer is in dormant state at ECS. If the bearer is found to be in dormant state, then such buffered packets will be
dropped.
CSCuq23706 - Removal of dynamic Rule is not working in UE only mode
Applicable Products: GGSN, P-GW
Feature Changes
Processing of Rule Removal
Previous Behavior: Removal of PCEF rules failed in the UE-only mode.
New Behavior: Rule removal will be accepted in UE-only mode for EPS IP-CAN bearer.
This generic behavior is per the standards and presently customers are using custom based CLIs for GnGp use cases.
Customer Impact: Some functionalities for GnGp handover which were not working previously will work now. For
example, GnGp handover cases having default bearer with charging rules will work seamlessly in both UE-only and
mixed modes.
example, GnGp handover cases having default bearer with charging rules will work seamlessly in both UE-only and
mixed modes.